QHCE 992 Catback — Porsche 911 Carrera / S / 4S / Turbo (992)
VALVETRONIC
Whisper to wide‑open.
Valves shut, it’s refined enough for a 6 a.m. start. Valves open, it roars. Flip the valves and hold the throttle — feel it climb.
Verify fitment with your vehicle
Confirm this kit is engineered for your exact car before checkout.
Porsche kept the flat-six honest for 60 years. The 992 turbo flat-six is the most refined version yet — also the most muted by emissions law. This catback wakes the boxer growl that defined the brand.
FITMENT
| Chassis | 992 (911.II generation, 2020+) |
|---|---|
| Years | 2020 – 2024 |
| Engine | 3.0L twin-turbo flat-six (Carrera/S/4S) or 3.7L twin-turbo (Turbo/Turbo S) |
| Trims | Carrera, Carrera S, Carrera 4S, Carrera GTS, Turbo, Turbo S |
| Mid-pipe flange | OEM, bolt-on — no cutting, no welding |
SOUND PROFILE
Closed: hushed Sport mode growl, won't wake the kids. Open: classic flat-six honk back, turbo whistle through the gates, lift-off pop on every shift.
Measured at 50 ft, idle, ambient temp. WOT pulls 8-12 dB higher.
MATERIAL SPECS
- Pipes: 304L stainless, 1.5mm wall — gas-tungsten-arc welded throughout
- Welds: TIG-welded, back-purged, X-ray inspected
- Muffler chamber: Dual-valve PSE-replacement design (no PSE conflict on retrofit)
- Tips: Forged carbon over stainless inner, dual oval racing tips per side
- Heat shielding: Multi-layer titanium foil + stainless wrap on muffler section
WHAT'S IN THE BOX
- Full catback assembly (mid-pipe + muffler + tailpipes)
- Pre-installed electronic valve actuators (CNC-machined billet)
- Wireless remote (anodized aluminum fob)
- Key-chain switch + cabin-mount controller
- All OEM-spec hardware, gaskets, V-band clamps
- Printed install guide + digital fitment notes
INSTALLATION
2.5-4 hours on a lift. Bolt-on, no cutting, no tuning. New gaskets and clamps included. Strongly recommend a lift; this car sits low.
SHIPPING & LEAD TIME
| Production | ~7 business days — every kit is built-to-order, TIG-welded and QC'd before it leaves the floor. |
|---|---|
| Freight | 4–5 business days, continental US, fully insured + tracked. |
| Total time to door | Roughly 2.5 weeks from checkout to delivery. |
| Shipping cost | Free on orders $1,000+ in the continental US. AK / HI / international quoted at checkout. |
| Notes | You'll get a tracking number the moment the kit ships. Any production delays are flagged in writing the same day. |
WARRANTY
Lifetime structural warranty on the pipes — cracks, weld failures, rust-through, covered. 2 years on electronic valve actuators and remote system. 1 year on cosmetic finish (carbon weave, anodization, laser engraving).
For off-road / track use only. Not CARB-certified. Loud — check local laws before street use.
PRODUCTION
Built-to-order, TIG-welded, QC'd before freight.
FREIGHT
Continental US. Fully insured + tracked.
FREE SHIPPING
Continental US orders over $1,000.
STRUCTURAL WARRANTY
Lifetime on pipes · 2 yr on electronics.
BUILT TO ORDER
ORDER TODAY. HERE'S YOUR TIMELINE.
BUILD SLOT RESERVED
Order locked. Your kit enters the fabrication queue same day.
FABRICATION COMPLETE
TIG-welded, leak-tested, QC'd, crated. ~7 business days.
FREIGHT
Insured + tracked across the continental US.
AT YOUR DOOR
Bolt-on install, no tune. First cold start that afternoon.
Dates computed live from today against the standard 7-day build + 4–5 day freight window. You get an email at every step.
WHAT'S IN THE BOX
EVERY KIT INCLUDES
- 01
FULL CATBACK SYSTEM
Mid-pipe, valved muffler, and tailpipes. Direct OEM flange fitment.
- 02
ELECTRONIC VALVE + ACTUATOR
Pre-installed and wired. Just plug into the included controller harness.
- 03
WIRELESS REMOTE
Glovebox-friendly fob. Open / close / auto.
- 04
KEY-CHAIN SWITCH
Smaller fob you can leave on the keyring.
- 05
IN-CABIN CONTROLLER
3M-mount it on the trim. Toggle from the driver's seat.
- 06
QHCE-LASERED CARBON FIBER TIPS
4-out tips with a subtle QHCE logo laser-engraved on the inside.
THE BADGE TAX, ITEMIZED
SAME ARCHITECTURE.
NONE OF THE MARKUP.
You're not paying less because it's worse. You're paying less because there's no importer, distributor, dealer, and ad budget between you and the workshop.
| QHCE | NAME-BRAND VALVED SYSTEMS | |
|---|---|---|
| This kit, delivered | $4,999.00 | $3,000 – $7,000+ |
| Electronic valve control | Remote + keyfob + cabin switch, included | Controller often sold separately |
| Construction | T304 stainless · carbon tips | T304 / titanium |
| Tune required | None — pure bolt-on | None |
| Structural warranty | Lifetime | 1–5 yr typical |
| Lead time | ~2.5 weeks, built to order | Frequently backordered |
Name-brand figures reflect typical published pricing and policies for electronically valved catback systems, mid-2026. Same valve architecture, same weld type — the savings come out of the middlemen, not the hardware.


















